Defence
-
64-bit PCI interface 5 V only 33/66 MHz PCI clock selectable Hold-down bracket to secure PCI board Learn More
-
64-bit, 66 MHz CompactPCI® interface Supports dual PMC module Onboard PCI-to-PCI bridge Compliant with CMC specification Learn More
-
- Intel® Xeon® E family, 8th/9th gen. Intel® Core™ i7/i5/i3 processors , Intel®Pentium® and Intel® Celeron® Processor
- 4 x DDR4 2400/2666MHz, UDIMM ECC (Xeon E only) Up to 128GB
- 8 x 10/100/1000 Mbps Copper ports on board with 2 bypass segments
- 4 x 10/100/1000 Mbps SFP ports onboard (SKU options)
- 2 x NMC slots (Network Mezzanine Card) for a wide range of GbE, 10GbE and 40GbE, 100GbE NMCs with or without advanced LAN bypass
- 1 x M.2 slot for storage, 2 x 2.5” HDD Bay, 1 x3.5” HDD Bay option, 1 CF slot SKU options
- 2 x PCIE x4 Slot on rear, support FH/HL add-on cards
- IPMI 2.0 compliant Remote Management (Optional)
-
- Supports 6th Generation Intel® Core™ i3/i5/i7 processors and Intel® CM236 PCH with embedded graphic (up to 3 independent displays)
- Up to 32GB (DDR4-2133) memory (max 16GB on board, socket SO-DIMM x1, max 16GB)
- Optimized dual-slot SBC with 2.5" SATA-III HDD/SSD, 2240 or 2280 M.2 socket, on-board Nandflash (optional)
- Two SATA ports, two USB 3.0, six USB 2.0 ports, two DP ports, two COM ports, one PS/2, one Audio, one VGA and PCIe x8 interfaces to the Rear Transition Module (RTM)
- Five Gigabit Ethernet ports including two PICMG 2.16 for front and rear connectivity
- PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.0 R3.0, PICMG2.9 R1.0 compliant
-
- Supports Intel® Atom™ E38xx, Celeron N2930 and J1900 processors, up to quad-core at 2 GHz
- Up to 8GB of 1333MHz DDR3L memory
- 2.5" SATA-II HDD/SSD mounting site
- Comprehensive I/O capabilities: DVI, USB 3.0/USB 2.0, Gigabit Ethernet, Serial Ports, SATA-II/CFast
- 4HP single slot high with dual GbE interfaces or 8HP dual slot high with quad GbE interfaces
- PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant
-
- Powered by single Intel® Xeon D-2100 series processor up to 16C/32T with optional Intel® QAT and DPDK to boost performance
- Short-depth chassis design with optional tool-less slide rail or 2post mounting kit fits in any service provider or enterprise edge
- Upgradable with interface for Advance-LTE/5G, WiFi5/6, PoE or 1G/10G/25G/40GbE ports expansion cards
- Advantech inhouse design IP for out-of-band management or diagnostics software
- Validated by Intel® Select Solutions for uCPE and leading NFVi software solution
-
- 1 x 1st/2nd Gen Intel® Xeon® Scalable Processors, up to 165W
- 12 x DDR4 2133/2400/2666 ECC registered memory up to 384GB
- Build-in QAT support (By SKU)
- 4 x NMC (Network Mezzanine Card) slots for a wide range of GbE, 10GbE, 40GbE and 100GbE NMCs with or without Advanced LAN bypass.
- 1 x internal PCIe x8 or x16 slots support for FH/HL add-on card
- 2 x internal 2.5" SATA HDDs/SSDs
- 1 x M.2 2280 SSD
- IPMI 2.0 compliant Remote Management
-
- Supports 4th /5th Generation Intel® Core™ i5/i7 processors and Intel® QM87 PCH with embedded graphic (up to 3independent displays)
- Up to 16 GB (DDR3 1600) low voltage ECC memory (max 8GB on board, socket SO-UDIMM x1, max 8GB)
- Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket
- Two SATAIII and two SATAII ports, two USB 3.0, four USB 2.0 ports, two DVI ports, four RS-232 ports, one PS/2 connector, and PCIe x16 interfaces to the Rear Transition Module (RTM)
- Four gigabit Ethernet ports for PICMG 2.16, front and rear connectivity
- PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant
-
- Single or dual Intel® Xeon® E5-2600 v4 processor(s) up to 145W TDP
- DDR4 2400 MHz ECC registered memory up to 512 GB (CPU SKU)
- 4 x GbE with LAN bypass, 2 x GbE for Mgmt (SKU dependent)
- 2 x 10GbE SFP+ NICs (SKU dependent)
- Up to 4 x NMC (Network Mezzanine Card) slots for a wide range of GbE, 10GbE and 40GbE NMCs with or without advanced LAN bypass
- 2 x 2.5" SATA HDDs/SSDs
- IPMI 2.0 compliant Remote Management
- Advanced Platform Reliability and Serviceability
- 2 x internal CLC PCIE card (Dual DH8955)supported (SKU dependent)
-
- Supports 22nm Intel® Xeon® processor
- Intel® DH8900 chipset supports DM1.0 x 4
- Up to 16GB DDR3-1333/1600 ECC memory
- Supports up to five GbE ports, six USB2.0 ports, two VGA ports,three COM ports, one PS/2 connector, three 2.5" SATA connector (one SATA HDD is optional with 8GB NAND flash), one Cfast, one PCIe 2.0x4 interface to the Rear Transition Module (RTM)
- PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.16 R1.0 Compliant