Industrial Serial Converters / Isolators / Repeaters
-
Supports serial data transfer rates to 230.4 kbps
Built-in 16C950 compatible UART
128-byte deep Transmit/Receive FIFOs
15V ESD protection on all signal pins
Compliant with PCI Express Base Specification 1.1
Learn More
-
Converts RS-232 signals to RS-485 signals
Extends data communication up to 1219 meters (4000 ft)
Multi-drop capability - up to 32 receivers per driver
Pluggable terminal block for easy wiring
Data rate: up to 115.2 kbps
Quick, easy inline installation
12 VDC power supply required (not included, sold separately)
Learn More
-
Convert unbalanced, full-duplex RS-232 to balanced, full-duplex or half-duplex RS-485
Extend RS-232 data signals up to 1.2 km (4000 ft)
240 kbps baud rate (typical)
Quick, easy inline installation
Power supply required (not included, sold separately)
Learn More
-
RS-232 to RS-422 or RS-485 (2 or 4 wire) serial conversion
2,000V, two-way optical isolation (input/output)
Data rate: 115.2 kbps
Quick, inline installation
Removable terminal blocks for RS-422/485
Automatic Send Data Control - no software drivers necessary
10 to 48 VDC external power required (not included, sold separately)
Learn More
-
- Extend RS-232 data signals up to 1.2 km (4,000 ft.)
- Change RS-232 TD and RD to RS-485 signals
- Automatic Send Data Control - no software drivers necessary
- Baud rates up to 115.2 kbps
- Powered from RS-232 handshake lines - no power supply required
Learn More
-
- Converts serial data signals to multi-mode ST fiber optic
- 2 KV 3-way optical isolation (input/output/power); EMI/RFI protection
- Data rate: up to 115.2 kbps
- Wide operating temperature: -40 to +80 °C
- DIN mount, IP20 plastic case
- 10–48 VDC power source required (not included, sold separately)
- UL Class 1 / Division 2
Learn More
-
- RS-232 to RS-422/485 Converter
- Three-way 2 KV optical isolation (input, output, power)
- UL Class 1/Division 2
- Wide operating temperature: -40 to +80 °C
- Modbus ASCII/RTU, Allen-Bradley® DH-485 compatible
- DIN Rail Mounting, DB9 F / TB
- 10–48 VDC input power range (power supply required, not included, sold separately)
Learn More
-
Extend RS-232 data signals up to 1.2 km (4,000 ft.)
Change RS-232 TD and RD to RS-485 signals
Automatic Send Data Control - no software drivers necessary
Baud rates up to 115.2 kbps
Learn More
-
- RS-232 to RS-485 2-Wire Converter
- DB9 F / TB
- Data rate up to 115.2 kbps
Learn More
-
- Convert RS-232 data signals to RS-422/485
- 2 kV optical isolation on input/output; ESD protection (8kV contact, 15kV air)
- Data rate: up to 460.8 kbps (bit-wise enable)
- -40 to +80°C wide operating temperature
- Rugged metal panel mount case (DIN rail adapters sold separately)
- 10-30 VDC external power source (not included, sold separately)
- UL Listed
Learn More
