Computer On Modules
-
- Intel® Ethernet Controller I350-AM4
- Four 10 / 100 / 1000Base-T Ethernet ports (RJ45 connectors)
- PCIex4 gen2 host interface
- UDP, TCP and IP Checksum Offload
- UDP and TDP Transmit Segmentation Offload
- VMDq and SR-IOV Support with 8 RX and 8TX queues per port
- Parity or ECC protected buffers
- Fully Integrated to comply with IEEE802.3u
- Compliant with VITA 42.0-2005, 42.3-2006 XMC specifications
-
- 4-Port/8-Port RS-232/422/485 isolated
- 32bit 33MHz PCI bus backplane
- Speed up to 921600bps
- UART 16C550 Compatible 5G Register Set
- 2KV Surge protection
- Support 5V only power input
- Support Front Line out & Rear Line out
- PICMG 2.0 Rev. 3.0 compatible
-
- 4-Port/8-Port RS-232/422/485 isolated
- 32bit 33MHz PCI bus backplane
- Speed up to 921600bps
- UART 16C550 Compatible 5G Register Set
- 2KV Surge protection
- Support 5V only power input
- Support Front Line out & Rear Line out
- PICMG 2.0 Rev. 3.0 compatible
-
- Standard 3U 4HP CompactPCI® form factor
- Up to four Intel® i210 Ethernet controllers
- Four or two 10/100/1000BASE-T Ethernet ports via RJ-45 connectors
- Two LAN ports switchable to rear (MIC-3958R)
- Compliant PICMG2.0 R3.0
-
- Supports 3rd Generation Intel® Core™ processor
- Intel® QM77 Platform Controller Hub
- 4 or 8GB DDR3-1600 soldered SDRAM with ECC
- Triple independent display support
- Optional 8GB SATA NAND Flash on board
- 2.5" SATA-III SSD, CFast, XMC on 8HP version
- Two 10/100/1000 Mbps ports, 2 USB 3.0 ports, 1 VGA port on front panel (4HP)
- Two COM ports, 2 Display ports, 1 PS/2 port (8HP-1)
- 4 x M12 1GbE Ethernet (8HP-4)
- Supports CompactPCI PlusIO
- PICMG2.0, R3.0 , PICMG2.1, R2.0, PICMG2.30 compliant
-
- Supports Intel® Atom™ Processor E3826/E3827/E3845
- Supports up to 4GB DDR3L-1333 soldered ECC memory
- Optional extension module on 8HP and RIO for VGA, LAN, USB, PS/2, Audio, COM ports
- Supports fanless application with optimized heatsink design
- Designed to meet EN50121-4 and EN50155 for railway applications
- PICMG2.0 R3.0, PICMG2.1 R.0 Compliant
-
- Intel® latest 6th Gen 14nm Xeon®/Core™ processor with CM236 PCH
- Up to 16GB DDR4-2133 soldered memory with ECC or Non-ECC
- Multi-option storage as 2.5" SATA, Cfast, Mirco SD, etc
- 2 RJ45 GbE LAN, 2 USB3.0, 1VGA on front 4HP panel
- 4 M12 X-Coding or 4 RJ45 GbE LAN on 8HP XTM-2 front panel
- Design to meet EN50121-4 & EN50155 for railway application
- PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.3 Compliant
-
- Hosts up to eight 3U Eurocard boards
- CompactPCI® Legacy or Plus IO Hybrid backplane
- PICMG 2.11 power supplies
- ATX power supply option for cost sensitive applications
- Dual system ready
-
- 8-slot CompactPCI® Legacy or Plus IO Hybrid backplane
- PICMG2.11 47 pin CPCI power interface
- Mini-fan or fanless design
- Rear IO support option
- 11 or 21 slots dimension aluminum anode enclosure
- PICMG 2.0, PICMG2.11, PICMG 2.3 PlusIO
-
8-slot 6U CompactPCI® backplane AC cPCI 500 W + 250 W redundant (2+1) power supplies Learn More