- Description
-
Details
Model BB-485TBLED converts unbalanced, full-duplex RS-232 signals to balanced, full or half-duplex RS-422 or RS-485 signals. RS-485 is an enhanced version of the RS-422 Standard allowing multiple drivers and receivers on a two-wire or four-wire system. The RS-232 port, configured as a DCE port, has a female DB25 connector with pins 2 (TD input), 3 (RD output), and 7 (Signal Ground) supported. Pins 4 (RTS) and 5 (CTS) are tied together, and pins 6 (DSR), 8 (CD), and 20 (DTR) are also tied together. Pins 1 (Frame Ground) and 7 (Signal Ground) are connected straight through to the RS-485 terminal blocks. The RS-485 terminal blocks support Transmit Data (A-) and (B ), Receive Data (A-) and (B ), Frame Ground, Signal Ground, and 12 VDC input. Model BB-485TBLED required a 12 VDC external power source (power supply not included, sold separately).
- Additional Information
-
Additional Information
Features • Converts RS-232 signals to RS-485 signals
• Extends data communication up to 1219 meters (4000 ft)
• Data rate: up 115.2 kbps
• Quick inline installation
• Terminal block for easy wiring
• LEDs for Receive and Transmit data lines
• Multidrop capability - up to 32 receivers per driver
• 12 VDC power supply required (not included, sold separately)Packing List BB-SMi6-12-V-ST – Power Supply, 12 VDC, 6 Watt, Stripped and Tinned,
International AC Input, International AC Blades (power supply required)Ordering Information BB-485TBLED Diamensions 54.5 x 84.34 x 18.43 mm (2.14 x 3.32 x 0.725 in) - Reviews
-
- Data Sheet
-
