Industrial Serial Converters / Isolators / Repeaters
-
- RS-232 to RS-422 converter
- Extends RS-232 line up to 1200 m (4000 ft)
- Data rates up to 115.2 Kbps
- DB9 F / DB9 F
- Powered from RS-232 handshake lines - no power supply required
Learn More
-
- RS-232 to RS-422 converter
- Extends RS-232 line up to 1200 m (4000 ft)
- Data rates up to 115.2 Kbps
- DB9 F / DB9 F
- Powered from RS-232 handshake lines - no power supply required
Learn More
-
- RS-422 to 5 V TTL Converter
- Data rates up to 115.2 Kbps
- DB25 M / DB25 F
- Power supply required (not included, sold separately)
Learn More
-
- RS-232 to RS-422/485 Converter
- Extend RS-232 data signals up to 1.2 km (4000 ft)
- Data rates up to 115.2 Kbps
- 3 powering options: Battery (2) AAA, RS-232 handshake lines, or external power supply (not included, sold separately)
- DB9 F / TB
Learn More
-
- RS-232 to RS-422/485 Converter
- 1.5 KV Isolation
- DB9 F / TB
- RS-232 side powered by RTS / CTS
- 12 VDC power supply (required, not included, sold separately)
- cULus Recognized
Learn More
-
- EMI/RFI transient immunity to surges, spikes, ground loops
- Data rate:115.2 kbps; up to 4 km (2.5 mi) range
- Quick, inline installation
- Note: use in pairs; one at each end of fiber transmission line
- Port-powered, no external power required
- Optional external powering (power supply not included, sold separately)
- Computers & terminals use one modem without switching
Learn More
-
- RS-232 to RS-422 or RS-485 (2 or 4 wire) serial conversion
- 2 KV two-way optical isolation
- Data rate up to 115.2 kbps
- Quick, inline installation
- Removable terminal blocks for RS-422/485
- 10 to 48 VDC external power required (not included, sold separately)
Learn More
-
- Converts serial data signals to multi-mode ST fiber optic
- Inverted fiber state - fiber light OFF in idle state
- 2 KV 3-way optical isolation (input/output/power); EMI/RFI protection
- Data rate: up to 115.2 kbps
- Wide operating temperature: -40 to +80 °C
- DIN mount, IP20 plastic case
- 10–48 VDC power source required (not included, sold separately)
- UL Class 1 / Division 2 rated
Learn More
-
- Extend serial signals up to 4 km (2.5 mi) over multi-mode fiber
- Point-to-point or multi-drop ring configuration
- Inherent EMI/RFI immunity/isolation from surges, spikes, ground loops
- Data rates: RS-232, up to 115.2 kbps; RS-422/485, 500 kbps
- Quick, inline installation
- External power source required (not included, sold separately)
Learn More
-
- Converts serial data signals to multi-mode fiber
- Inverted fiber state – fiber Off in idle state
- 2 KV, 2-way isolation; EMI/RFI protection
- Data rate: up to 115.2 kbps
- Wide operating temperature: -40 to +80 °C
- DIN rail mount
- 10-30 VDC power source required (not included, sold separately)
Learn More
