Industrial Rackmount Chassis

The most cost-effective rackmount chassis

Supports 250/300 W ATX PFC PS/2 power supply

Easy to install front-accessible drive bays to hold three 5.25" and two 3.5" drives (one front-accessible & one internal)

Front-accessible USB & PS/2 interfaces

Designed to withstand environmental extremes, such as shock, vibration and high temperature

• Supports an ATX motherboard or a backplane with up to 15 slots
• Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5" disk drives
• Special hold-down clamp design with rubber cushions protects the cards from shocks and vibrations
• Power and HDD activity notification improves system availability
• Front-accessible air filter for easy system maintenance
• Lockable front door prevents unauthorized access
• Flexible mechanical design supports both 300 W single PS/2 and redundant ATX power supply

• All I/O ports, buttons, LEDs, drive bays, AC inlet located on the front side
• Supports ATX/Micro ATX MB with CPU TDP up to 120W
• Built-in 500W single or redundant power supply
• 350mm short depth
• Optional module for dual hot-swap 2.5" drive drive bays for RAID 0, 1
• PWM controlled smart fan generating low noise

• Dual nodes, 350mm depth design for easy maintenance and space saving
• Supports PICMG 1.3 or PCI half-sized slot SBC with Core i7 CPU
• Supports 6-slot backplane, 3 available slots per node
• Supports 2 front USB 3.0 ports each node
• Supports 250W or 350W Flex ATX PSUs

• Supports either an ATX motherboard or a PICMG backplane with up to 15 slots
• Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5" disk drives 
• Front LED indicators and audible alarm notification for system fault detection 
• Low noise system fans with fan speed control 
• Built-in Intelligent System Module enables whole system fan control and remote manageability

• Supports either an ATX motherboard or a PICMG backplane with up to15 slots
• Support dual SATA hot-swap HDD trays
• LED indicators and alarm notification for system fault detection
• Low noise system fans
• Built-in Intelligent System Module enabling whole system fan control and remote manageability

• Compact 4U rackmount chassis, with only 348mm depth
• Supports 14-slot BP for half-size SBC or ATX/MicroATX motherboard
• Shock-resistant disk drive bay holds one internal 2.5", and two front-accessible 3.5" drives, plus one slim optical disk drive. Optionally, the two front-accessible 3.5" slots may be converted to two or even four 2.5" mobile SATA HDD trays by using optional part IDT-3120E
• Supports 80plus single power supply
• Front-accessible system fan without opening top cover for easy maintenance
• LED indicators and audible alarm notification for system fault detection
• Smart fan speed control for system fans
• Remote management (with SUSIAccess 2.1)

• Supports EATX/ATX motherboard
• Shock-resistant disk drive bay provides four hot-swap 3.5" or 2.5" SAS/SATAdisk trays, one slim optical disk drive, and one 3.5" internal drive
• With optional storage upgrade kit installed, system equipped up to eighthot-swap HDD trays for higher storage capacity requirement
• Supports 80plus single and redundant power supply
• Front-accessible system fan without opening top cover for easy maintenance
• LED indicators and alarm notification for system fault detection
• Built-in Intelligent System Module enabling whole system fan control and remote manageability

• 6U rackmount chassis supports up to 4 multi-systems
• LED indicators and audible alarm notification for system fault detection
• Four 9 cm / 53 CFM ball-bearing system fans for excellent cooling
• Various backplane options for up to 20 slots
• Lockable front door prevents unauthorized access
• Supports up to 4 sets of dual USB ports in the front
• Four reserved 9-pin D-sub openings on the rear panel