Industrial Data Acquisition & Communication
-
48 optically-isolated digital input channels
Built-in plug-in screw terminals for easier wiring
LEDs indicate input logic status
Input buffered with voltage comparators
Wet/Dry contact set by DIP switches
Input logic set by jumper
Wide input range from 5 to 30 V
Learn More
-
Built-in plug-in screw terminals for easier wiring
LED status indicators for D/I and relay output
Digital inputs buffered with voltage comparators
Wet/Dry contact set by DIP switches for D/I
Wide input range from 5 to 30 V
INT/EXT Power selection by jumper
Learn More
-
Built-in plug-in screw terminals for easier wiring
LED status indicators for Relay output
DIN-rail mounting
Onboard relay driver circuits
Learn More
-
Isolation signal-transferred for DIO and Counter
8 differential AI inputs programmable
Reserved slot for each channel to plug-in active-filter PCLD-8811
2,500 VDC DI/O isolation protection
500 mA maximum loading for each DO channel
DIN-rail mounting case for easy mounting
Learn More
-
Low-pass active filter
8 set of low-pass Frequencies form 10Hz up to 40KHz
2 single-ended or 1 differential AI inputs
Offset and gain calibration
Learn More
-
16-single-ended or 8 differential AI inputs, programmable
On-bard CJC circuit for direct thermocouple measurement
Reserved space for signal-conditioning circuit such as PCLD-8811
Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable connections
DIN-rail mounting case for easy mounting
Supports PCI-1710U/UL/HGU, PCI-1711U/UL, PCI-1716/L, PCI-1741U, PCI-1742U
Learn More
-
- 16-single-ended or 8 differential AI inputs, programmable
- On-bard CJC circuit for direct thermocouple measurement
- Reserved space for signal-conditioning circuit such as PCLD-8811
- Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable connections
- DIN-rail mounting case for easy mounting
- Supports PCIE-1810, PCIE-1816/H
Learn More
-
Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector
Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1" x 1.8" x 2.0")
To Be Used With PCI-1714U/UL, PCL-728, PCL-740, PCL-741, PCL-743B, PCL-745B
Learn More
-
Low cost universal DIN-rail mounting screw terminal module for industrial applications with 100-pin SCSI female connector
Dimensions (W x L x H): 80 x 230 x 42 mm (3.14" x 9.05" x 1.65")
Learn More
-
Low cost universal DIN-rail mounting screw terminal module for PC-LabCard products with 20-pin connector
Case dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.1" x 2.7" x 2.0")
To Be Used With PCI-1735U, PCL-711B, PCL-720+, PCL-726, PCL-727, PCL-730, PCL-812PG, PCL-816, PCL-818 Series, PCL-836
Learn More
