Industrial Automation Controllers
-
- 12 analog input channels (12-bit, 1000 sample/second per channel)
- Supports various input types: 0 ~ 500 mV, ±10 V, 0 ~ 10 V, 0 ~ 20 mA, 4 ~20 mA
- Each input channel can be configured with different input types and range
- 2500 VDC optical isolation between channels and backplane bus
- ±35 VDC over voltage protection
- Wire burnout detection for 4~20 mA current input
Learn More
-
- Wire Burn-out Detection
- High Density Channel design, total 8 channels
Learn More
-
- Get ODVA (Open DeviceNet Vendors Association ) authorized conformance certification
- Support Ethernet/IP protocol which can be connected with Ethernet/IP master
- Dynamic configuration allows users to configure different channels with different type and range in one module
- Two RJ-45 ports with the same IP address for building daisy chains, saving IP address used and installation cost
- Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points)
- Easily create L5K I/O configuration file by utility and leverage it within application software
Learn More
-
- mini PCI express 2.0 Interface: support Advantech iDoor Technology
- mSATA Interface: supportt SATA GENI/GENII/GENIII
- Supports Hot Plug
Learn More
-
- SATA Interface
- Support SATA I/II/III 2.5" HDD/SDD
- Support Hot swap
- Supports RAID 0/1
Learn More
-
- Onboard Intel XScale® PXA270 520 MHz processor
- 64 MB SDRAM on board, 32 MB Flash
- Expands I/O by connecting with APAX-5000 I/O modules
- 2 x 10/100 Mbps RJ-45 LAN ports and 2 x Isolated RS-485 ports
- 2 x Isolated CAN bus interfaces to support CANOpen stack
- 1 x VGA port for display and 1 x USB port
- 1 x CompactFlash slot for data storage
- Windows CE, C/C++, .NET ready platform
Learn More
-
- 4th Generation Intel® Core™ i7/i3/Celeron Processors up to 1.7 GHz with 4GB/8GB DDR3L Memory
- 2 x GbE, 4 x USB 2.0/3.0, 1 x RS-232 /422/485, 1 x VGA, Audio
- Dual power input and UPS support
- Compact with Fanless Design
- Supports Fieldbus Protocol by iDoor Technology
- 3G/GPS/GPRS/Wi-Fi Communication by mPCIe
- Chassis Grounding Protection
Learn More
-
- CODESYS V3.5 Control RTE
- 2 x GbE, 4 x USB 2.0/3.0, 1 x RS-232 /422/485, 1 x VGA, Audio
- Dual power input and relay indicator
- Compact with fanless design
- Supports fieldbus protocol through onboard LAN port and iDoor
- 3G/GPS/GPRS/Wi-Fi communication by mPCIe
- Chassis grounding protection
Learn More
-
- 2-ch CAN port
- Support CAN2.0B, compatible with CAN2.0A
- Data Transfer Rate: 1Mbits/s
- Optical isolation protection of 2,500 VDC ensures system reliability
Learn More
-
- Host Bus 4-lane Gen 2.0 PCIe interface, compliant with PCIExpress Base Specification, Revision 2.0
- Controller Host Controller – Fresco FL1100Compliant with USB 3.0 Specification and Intel® xHCI Specification, Revision 1.0
- Max. Current: 1500 mA maximum per port
- Data Transfer Rate: SuperSpeed (5.0 Gbps); High Speed (480.0 Mbps); Full Speed (12.0 Mbps); Low Speed (1.5 Mbps)
Learn More
