Industrial Automation Controllers
-
- mini PCI express 2.0 Interface: support Advantech iDoor Technology
- mSATA Interface: supportt SATA GENI/GENII/GENIII
- Supports Hot Plug
Learn More
-
- Get ODVA (Open DeviceNet Vendors Association ) authorized conformance certification
- Support Ethernet/IP protocol which can be connected with Ethernet/IP master
- Dynamic configuration allows users to configure different channels with different type and range in one module
- Two RJ-45 ports with the same IP address for building daisy chains, saving IP address used and installation cost
- Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points)
- Easily create L5K I/O configuration file by utility and leverage it within application software
Learn More
-
- Wire Burn-out Detection
- High Density Channel design, total 8 channels
Learn More
-
- 12 analog input channels (12-bit, 1000 sample/second per channel)
- Supports various input types: 0 ~ 500 mV, ±10 V, 0 ~ 10 V, 0 ~ 20 mA, 4 ~20 mA
- Each input channel can be configured with different input types and range
- 2500 VDC optical isolation between channels and backplane bus
- ±35 VDC over voltage protection
- Wire burnout detection for 4~20 mA current input
Learn More
-
- 8-ch voltage and current output
- Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA
- Resolution: 14-bit
- Short Circuit Protection
- Isolation between channels and backplane
Learn More
-
- Supports both sink and source type input
- Rated voltage input value: 24 VDC
- ±70 VDC over voltage protection
- Input characteristic curve according to IEC 61131, type 1
- Each digital channel has its own status LED
- Isolation between channels and backplane
Learn More
-
- Thermal Shutdown Protection
- Short Circuit Protection
- 2,500 VDC Isolation Between Channels and Backplane
Learn More
-
- Relay type: Form A (SPST)
- Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC
- Each digital channel has its own status LED
- Isolation between channels and backplane bus
Learn More
-
- 2x full function combo slots (Include 2x High Speed Connector + 2x APAX Connector)
- Bypass 24VDC to the right side APAX connector for APAX-5002 expansion
- EtherIO driver technology to replace the DSP function in the traditional backplane
Learn More
-
- One slot for one APAX-5000 modules
- Combines with APAX-5002 backplane to satisfy installation requirements
- Supports both DIN-rail and wall mounting
- Hot swap mechanism for all APAX I/O modules
- 30G shock resistance and 2Grms vibration resistance
Learn More
