Industrial Automation Controllers
-
- Function: Conversion of EtherCAT to 100BASE-TX Ethernet for extension of the EtherCAT network
- Cable : Ethernet/EtherCAT cable (min. Cat. 5) shielded
- Distance between stations : Max. 100 m (100BASE-TX)
- Bus Interface : 1 x RJ45
- Power from bus : N/A
Learn More
-
- Channels : 4
- Digital Input : Wet Contact
- Rated voltage: 24 VDC
- Logic level 1: 10~30 VDC and -10~-30 VDC
- Input Delay : From logic level 0 to 1: 4 ms
- From logic level 1 to 0: 4 ms
- Logic level 0: -3~3 VDC
- Digital Filter : 3ms
Learn More
-
- Channels: 4
- Output Type: V, mV, mA
- Output Range: 0~5V, 0~10V, ±5V, ±10V, 4~20mA, 0~20mA
- Resolution: 16-bit with accuracy, 0.01% FSR@25°C
- Slew Rate: Configurable
- Drift: ± 50 ppm/°C
- Current Load Resistor: Max. 500 Ω
- Voltage Load Resistor: Min. 1KΩ
Learn More
-
- Channels : 4 (Differential)
- Input Type : V, mA
- Voltage Range : ±10 V, 0 ~ 10 V, 0 ~ 20 mA
- Input Impedance : 800 kΩ, for voltage input, 500 Ω, for current input
- Resolution : 16-bit with ±0.1% for voltage input, 16-bit ±0.2% for current input
- FSR accuracy : @25°C
- Sample Rate : 10k sample/s (per channel)
Learn More
-
- Channels: 2
- Counting Range: 32-bit
- Mode: Counter (up/down, bidirection, up, A/B Phase)
- Signal Input: Logic level 0: 0 ~ 3 VDC, Logic level 1: 10 ~ 30 VDC
- Input Frequency: 5 Hz ~ 1 MHz max. (frequency mode), 1 MHz max. (counter mode)
Learn More
-
- Channels:16 (Source Type)
- Voltage Rating:10~30VDC
- Rated Current Output:0.5A per channel atsignal "1"
- Leakage Current:10 μA per channel atsignal "0"
- Output Delay:From logic level 0 to 1:150μs; From logic level 1 to 0: 2ms
Learn More
-
- Channels : 6 (Differential)
- Input Type : V,mV
- Voltage Range : ±150 mV, ±500 mV, ±1V, ±5 V, ±10 V
- Input Impedance : >10M Ω
- Resolution : 16-bit with ±0.1% FSR accuracy
- Sample Rate : 100 sample/s (per channel)
Learn More
-
- Channels:16
- Digital Input;Dry Contact;Logic level 1: close to Iso.GND;Logic level 0: open;Wet Contact;Rated voltage: 24VDC;Logic level 1: 10~30 VDC;and -10~-30 VDC;Logic level 0: -3~3 VDC
- Input Delay:From logic level 0 to 1: 4ms;From logic level 1 to 0: 4ms
- Digital Filter: 3ms
Learn More
-
- Channels: 8 (Sink Type)
- Voltage Rating: 10~30VDC
- Rated Current Output: 0.3A per channel at signal "1"
- Leakage Current: 25 μA per channel at signal "0"
- Output Delay: From logic level 0 to 1: 10μs; From logic level 1 to 0: 100μs
Learn More
-
- Precise and Deterministic Digital Input
- 2-ch Timestamp Digital Input
- 6-ch Regular Digital Input
- Timestamp resolution: 1ns
- Rising Edge & Falling Edge DI Latch
Learn More
