Industrial Automation
-
- IP30 Rated enclosure
- 30W for PoE+, per Ethernet port
- LED indicators for power, PoE, and other status
- Provides over current protection
- Extended operating temperature of -40 to +75°C
- Supports VDSL, Band plans 997 and 998 (symmetrical and asymmetrical) transmission per ITU-T G.993.2 standard
-
- Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
- Provides 1 x 100 Mbps Multi-mode fiber optic port
- Supports full/half duplex flow control and internal jumper for setting
- Supports store and forward transmission
- Supports auto-negotiation
- Supports MDI/MDI-X auto crossover
- Provides surge protection (EFT) 3,000 VDC for power line
-
- Provides 1 x 1000 Mbps Ethernet port with RJ45 connector
- Provides 1 x 1000 Mbps fiber port with SC or SFP (mini-GBIC) type connector for 1000Base-SX/LX device
- Provides DIP switch for full/half duplex setting
- Supports MDI/MDI-X auto crossover
- Supports Auto-Negotiation
- Supports redundant 12 ~ 48 VDC power input
- Provides flexible mounting: DIN-rail and Wall mount
- Provides Link Fault Pass-through (LFP)
- Jumbo Frame: 9K bytes
-
- Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
- Provides 1 x 100 Mbps multi-mode/single-mode SC type fiber port
- Provides internal jumper for Link Fault Pass-through (LFP) setting
- Supports full/half duplex flow control
- Supports store and forward transmission
- Supports auto-negotiation
- Supports MDI/MDI-X auto crossover
-
- -40 ~ 85˚C wide-range operating temperature
- Dual Power input and 2 relay output
- Redundancy: Gigabit X-Ring Pro (ultra high-speed recovery time < 20 ms), RSTP/STP (802.1w/1D),MSTP
- Security: 802.1x (Port-Based, MD5/TLS/TTLS/PEAP Encryption), HTTPS, SSH and SNMPv3
- Management: SNMP v1/v2c/v3, WEB, Telnet, Standard MIB
- SFP socket for Easy and Flexible Fiber Expansion
- 20 x Gigabit SFP ports + 6 x Gigabit x RJ-45 ports
-
- Auto Bypass between Port 1 and Port 2
- EN50155 certified
- Backplane (Switching Fabric): 1.6 Gbps
- Wide redundant power design
- 8-port 10/100Mbps M12 type connector with IP-40 protection
- Dual redundant power input
- Supports wide operating temperature (-40~ 75° C)
-
- All 10/100 Mbps connections support dual ring protection and non-blocking traffic forwarding
- X-Ring Pro supports rapid and predictable convergence
- IEEE 802.3at PoE+ to supply 30W power
- IEEE 802.3af PoE to supply 15.4 power
- IEEE 802.3af/802.3at per port with system PoE power management
- Provides M12 connector with IP67 protection
- Operating Temperature: -40 ~ 70° C
-
- Operating temperature range -40 ~ 70°C
- M12 connector with IP40 protection
- IEEE802.3af PoE to supply 15.4 W of power
- IEEE802.3at PoE+ to supply 30 W of power
- Operating Voltage EKI-9508G-PH: 50.4~137.5 VDC EKI-9508G-PL: 16.8~60 VDC
- Power input EKI-9508G-PH: 72/96/110 VDC EKI-9508G-PL: 24/48 VDC
- 8 port M12 X-coded 10/100/1000Mbps PoE ports
- Complies with EN50155
-
- M12 connector with IP40 protection
- Operating Voltage EKI-9510G-2GH: 50.4~137.5 VDC EKI-9510G-2GL: 16.8~60 VDC
- Power Input EKI-9510G-2GH: 72/96/110 VDC EKI-9510G-2GL: 24/48 VDC
- 8 x M12 X-Coded 10/100/1000Mbps ports + 2 x M12 X-Coded 10/100/1000Mbps ports with Bypass function
- Complies with EN50155
-
- 8 ports Fast Ethernet RJ-45 (EKI-5528/I-EI)
- Entry-Level Managed Switch
- IXM function enables fast deployment
- Provides EtherNet/IP EDS (Electronic Data Sheet) file, AOI (Add-On Instructions) file, and FactoryTalk® View faceplate
- Management: SNMP v1/v2c/v3, WEB, Standard MIB, Private MIB