Industrial Automation
-
- Accuracy: ±0.1% or better
- Effective resolution: 12-bit plus sign bit
- 1000 Hz bandwidth
- High sampling rate:ADAM-5000/485&5000E: 100 samples/sec, ADAM-5510 & ADAM-5511: 8000 samples/sec max
- 3000VDC Isolation voltage protection
- Distinct range settings allowed on each channel
- Input type: mV, V, mA
-
- Accuracy: ±0.1% or better
- Effective resolution: 16-bit
- Input range: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V; ±20 mA
- Sampling rate: 10 samples/sec. (total)
- Isolation voltage: 3000 VDC
- Fault and overvoltage protection: withstands overvoltage up to ±35 V
- lnput type: mV, V, mA
- Channels: 8 differential
-
- Accuracy: ±0.1% or better
- Effective resolution: 16-bit
- Input connections: 2, 3 or 4 wire
- Sampling rate: 10 samples/sec. (total)
- Isolation voltage: 3000 VDC
- Input type: PT100 or Ni RTD
- Channels: 3
-
- 10/100Base-T auto-negotiation high-speed communication port
- Supports Modbus/TCP for easy integration
- Supports UDP event handling function
- 1500 VDC isolation for Ethernet communication
- Provides C and .NET class library to develop applications
-
- RS-485 communication for easy installation and networking
- 4 slots for up to 64 points data monitoring card control in one module
- Supports ADAM ASCII protocol or Modbus®/RTU protocol
- Supports Modbus/RTU protocol with user-defined Modbus address
-
- Optional SCADA software WebAccess through CTOS
- Integrated VGA port for local display of HMI software
- Can be operated with or without display/ keyboard/ mouse
- Remote monitoring through Web Server
- Remote maintenance via FTP Serve
-
- Cost effective DIN Rail IPC with VGA port for integrated target visualization
- Optional CoDeSys web Visu for Remote monitoring using Web browser based HMIs
- Free of charge CoDeSys V3 IEC-61131-3 development tool
- Supports five logic programming languages (LD,IL,FBD,SFC,CFC)
- Supports Modbus/RTU (Master/Slave) and Modbus/TCP (Server/Client)
- Supports SD Storage I/O Module
-
- 1 x SC fiber connector
- Operation mode: Point-to-Point,Redundant and Ring(half-duplex)
- Half/Full-duplex, bidirectional transmission mode
- Automatic RS-485 data flow control
- LED indicator to monitor status
-
- 2 x ST fiber connector
- Operation mode: Point-to-Point, and Ring (half-duplex)
- Half/Full-duplex, bidirectional transmission mode
- Automatic RS-485 data flow control
- LED indicator to monitor status
-
- Power from the USB port
- Hot swap function supported
- Isolation protection 3000 VDC provided
- Automatic RS-485 data flow control
- Transmission speed up to 115.2 kbps