Industrial Automation
-
- 6U rackmount chassis supports up to 4 multi-systems
- LED indicators and audible alarm notification for system fault detection
- Four 9 cm / 53 CFM ball-bearing system fans for excellent cooling
- Various backplane options for up to 20 slots
- Lockable front door prevents unauthorized access
- Supports up to 4 sets of dual USB ports in the front
- Four reserved 9-pin D-sub openings on the rear panel
-
- Supports EATX/ATX motherboard
- Shock-resistant disk drive bay provides four hot-swap 3.5" or 2.5" SAS/SATAdisk trays, one slim optical disk drive, and one 3.5" internal drive
- With optional storage upgrade kit installed, system equipped up to eighthot-swap HDD trays for higher storage capacity requirement
- Supports 80plus single and redundant power supply
- Front-accessible system fan without opening top cover for easy maintenance
- LED indicators and alarm notification for system fault detection
- Built-in Intelligent System Module enabling whole system fan control and remote manageability
-
- Compact 4U rackmount chassis, with only 348mm depth
- Supports 14-slot BP for half-size SBC or ATX/MicroATX motherboard
- Shock-resistant disk drive bay holds one internal 2.5", and two front-accessible 3.5" drives, plus one slim optical disk drive. Optionally, the two front-accessible 3.5" slots may be converted to two or even four 2.5" mobile SATA HDD trays by using optional part IDT-3120E
- Supports 80plus single power supply
- Front-accessible system fan without opening top cover for easy maintenance
- LED indicators and audible alarm notification for system fault detection
- Smart fan speed control for system fans
- Remote management (with SUSIAccess 2.1)
-
- Supports either an ATX motherboard or a PICMG backplane with up to15 slots
- Support dual SATA hot-swap HDD trays
- LED indicators and alarm notification for system fault detection
- Low noise system fans
- Built-in Intelligent System Module enabling whole system fan control and remote manageability
-
- Supports either an ATX motherboard or a PICMG backplane with up to 15 slots
- Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5" disk drives
- Front LED indicators and audible alarm notification for system fault detection
- Low noise system fans with fan speed control
- Built-in Intelligent System Module enables whole system fan control and remote manageability
-
- Dual nodes, 350mm depth design for easy maintenance and space saving
- Supports PICMG 1.3 or PCI half-sized slot SBC with Core i7 CPU
- Supports 6-slot backplane, 3 available slots per node
- Supports 2 front USB 3.0 ports each node
- Supports 250W or 350W Flex ATX PSUs
-
- Development kit for WISE-1510
- ARM Cortex-M4 processor
- RAM 64 KB memory / 256 KB Flash
- Compatible to support public LoRaWAN or LoRa private networks w/ WISE-3610
- Support 1 UART, 1 I2C , 1 SPI, 8 GPIO, 1 PWM, 4 ADC, 1 USB
- 22 x 30 mm M.2 key E
- Build-in temperature and humidity sensor
- Cable & antenna included
- WISE-PaaS/RMM cloud solution ready
- SDK for development
-
- All I/O ports, buttons, LEDs, drive bays, AC inlet located on the front side
- Supports ATX/Micro ATX MB with CPU TDP up to 120W
- Built-in 500W single or redundant power supply
- 350mm short depth
- Optional module for dual hot-swap 2.5" drive drive bays for RAID 0, 1
- PWM controlled smart fan generating low noise
-
- ARM Cortex-M4 Core Processor
- Compliant with 3GPP R14 NB-IOT standard
- Integrated with WISE-PaaS/RMM & MBED Cloud Service
- Rich interface for sensor and I/O control
- Support wide temperature -40 ~ 85 °C
-
- Supports M2.COM module
- 1 RS-232/422/485, 1 USB OTG
- 2 I2C, 1 I2S, 8 GPIO, 2 PWM, 2 ADC
- 1 SD card slot
- On board Humidity/Temperature sensor