Industrial Automation
-
- Wide Operating Temperature: -40 ~ 85° C
- Power inout: 10 to 48 VDC
- Automatic RS-485 data flow control
- 3000 VDC isolation protection
- Surge protection RS-485 data line
-
- Automatic RS-485 data flow control
- 3000 VDC isolation protection
- Surge protection RS-485 data line
- Transmission speed up to 115.2 Kbps
- LED indicator to monitor status
-
- Change RS-232 TD and RD to RS-485 signals
- Extend RS-232 data signals up to 1.2 km (4,000 ft.)
- Data rate: up to 115.2 kbps
- Quick, inline installation
- DIP switch selectable RS-422 or RS-485
- RS-232 port power or external 12 VDC source(power supply not included, sold separately)
-
- RS-232 to RS-485 Converter
- Extend RS-232 data signals up to 1.2 km (4,000 ft.)
- Data rate: 115.2 kbps
- Quick, inline installation
- DIP switch selectable RS-422 or RS-485
- RS-232 port power or external 12 VDC power jack (power supply not included, sold separately)
-
- RS-232 to RS-422 Converter
- Extends RS-232 line up to 1200 m / 4000 ft
- Data rates up to 90 Kbps
- DB25 M / DB25 F
- Power supply required (not included, sold separately)
-
- Convert RS-232 data signals to RS-422/485
- ESD Protection - 8 kV Contact, 15 kV Air
- Data rate: up to 460.8 kbps (bit-wise enable)
- Rugged metal panel mount case (DIN rail adapters sold separately)
- 10-30 VDC external power source (not included, sold separately)
- UL Listed
-
- Converts serial data signals to single-mode fiber optic
- 2 KV 3-way optical isolation (two data ports, power circuit) and EMI/RFI protection
- Data rates up to 115.2 kbps
- Wide operating temperature: -40 to +80 °C
- IP30 plastic case, DIN mount
- UL 508 rated
- 10 – 48 VDC input power range
- Up to 15 km (9 mi) range
- Power supply not included, sold separately
-
- Converts serial data signals to single-mode fiber optic
- 2 KV 3-way optical isolation (two data ports, power circuit) and EMI/RFI protection
- Data rates up to 115.2 kbps
- Wide operating temperature: -40 to +80 °C
- IP30 plastic case, DIN mount
- UL 508 rated
- 10 – 48 VDC input power range
- Up to 15 km (9 mi) range
- Power supply not included, sold separately
-
- Converts serial data signals to multi-mode fiber
- Inverted fiber state – fiber Off in idle state
- 2 KV, 2-way isolation; EMI/RFI protection
- Data rate: up to 115.2 kbps
- Wide operating temperature: -40 to +80 °C
- DIN rail mount
- 10-30 VDC power source required (not included, sold separately)
-
- Extend serial signals up to 4 km (2.5 mi) over multi-mode fiber
- Point-to-point or multi-drop ring configuration
- Inherent EMI/RFI immunity/isolation from surges, spikes, ground loops
- Data rates: RS-232, up to 115.2 kbps; RS-422/485, 500 kbps
- Quick, inline installation
- External power source required (not included, sold separately)